Bus Connector: PXIe.Number of Power Supply Channels: 2.Analog Output Voltage Range: 0 V to 10 V.Maximum Current: 6 A.Total Output Power: 120 W.Power Supply Source: Externally Powered.Includes Auxiliary Power: Yes...
The CBL-CSMS-FW is a ribbon cable used to connect a filter wheel to the Oriel CS130 and CS260 monochromators, as well as the MS260i imaging spectrograph. The instrument provides power as well as control to the filter wheel. This ribbon cable is compatible with filter wheel models 74010, 74041, and U..
The M-MT-XYZ Compact Metric Dovetail Linear Stage provides smooth, high resolution 3-axis XYZ positioning for miniature components. These unique stages are only 25.4 mm square yet provide a full 9.5 mm travel range. An integral 80 pitch drives provide 1 μm sensitivity. A threaded brass insert on ..
The SM-13 Vernier Micrometer is a standard drive for most Newport stages, and our most popular manual actuator. The SM-13 has a 13 mm travel range and a 9 lb load capacity. The SM-13 has a 0.5 mm pitch (50.8 TPI) threads and read directly in increments of 10 µm, with vernier reading of 1 µm...
The 13E20DM.10 Laser Line Dielectric Elliptical Mirror is a highly efficient reflector optimized for a narrow 1030 to 1090 nm wavelength range. This 1.30 inch (33.02 mm) minor axis, 1.838 inch (46.70 mm) major axis, elliptical mirror is made from a 9.37 mm thick Borofloat® 33 substrate. Borofloat ha..
The 39213 Focusing Lens is used with the 77330 Focusing Lens Assembly. It is a 1 inch (25.4 mm) diameter, Borosilicate Crown Glass, Bi-convex Lens with a 33 mm Focal Length. Bi-convex lenses are for imaging with little change in magnification. 330 to 2200 nm wavelength range...
The HR-13 Lockable High-Resolution Micrometers has 0.25 mm pitch threads (over 100 TPI), providing twice the sensitivity of standard SM Series Micrometers. These fine threads allow 0.5 μm sensitivity with direct position readout in 5 μm graduations. The HR-13 is recommended for applications re..
The 10Q20HBS.13P High-energy Nd:YAG Laser 50/50 Beamsplitter is manufactured using high purity fused silica substrates and ultra hard dielectric coatings. This beamsplitter has been tested to withstand high-energy pulses and is the ideal choice to work with Spectra-Physics Quanta-Ray lasers. The fro..
The 10Q20HBS.13S High-energy Nd:YAG Laser 50/50 Beamsplitter is manufactured using high purity fused silica substrates and ultra hard dielectric coatings. This beamsplitter has been tested to withstand high-energy pulses and is the ideal choice to work with Spectra-Physics Quanta-Ray lasers. The fro..
The 20Q20HBS.13P High-energy Nd:YAG Laser 50/50 Beamsplitter is manufactured using high purity fused silica substrates and ultra hard dielectric coatings. This beamsplitter has been tested to withstand high-energy pulses and is the ideal choice to work with Spectra-Physics Quanta-Ray lasers. The fro..
The 20Q20HBS.13S High-energy Nd:YAG Laser 50/50 Beamsplitter is manufactured using high purity fused silica substrates and ultra hard dielectric coatings. This beamsplitter has been tested to withstand high-energy pulses and is the ideal choice to work with Spectra-Physics Quanta-Ray lasers. The fro..
The IG-13-2 Industrial Grade Honeycomb Core Optical Breadboard has a 1 foot width, a 3 foot length, and is 2.3 inches thick with 1/4-20 holes on a 1 inch grid. The IG Series has become the standard for industrial applications not requiring the extremely high rigidity of the Newport RG and SG Series ..